Jump to content

Bentley railway station (Hampshire)

Coordinates: 51°10′52″N 0°52′05″W / 51.181°N 0.868°W / 51.181; -0.868
From Wikipedia, the free encyclopedia

Bentley (Hampshire)
National Rail
Bentley railway station
General information
LocationBentley, East Hampshire
England
Coordinates51°10′52″N 0°52′05″W / 51.181°N 0.868°W / 51.181; -0.868
Grid referenceSU792430
Managed bySouth Western Railway
Platforms2
Other information
Station codeBTY
ClassificationDfT category E
History
OpenedJuly 1854
Passengers
2018/19Decrease 0.144 million
2019/20Decrease 0.132 million
2020/21Decrease 20,640
2021/22Increase 64,764
2022/23Increase 82,486
Notes
Passenger statistics from the Office of Rail and Road
The station in 1963

Bentley railway station serves the village of Bentley in Hampshire, England. It is situated on the Alton Line, between Farnham and Alton. The station and all trains serving it are operated by South Western Railway.

The village of Bentley and the hamlet of Isington are roughly the same distance from the station.

History

[edit]

Bentley was the northern terminus of the Bentley and Bordon Light Railway, built in 1905 to serve the military camp at Bordon. Built with assistance of the British Army, the line closed to passengers in 1957 (remaining open to serve traffic to the Longmoor Military Railway in times of emergency) and closed to all traffic in 1966; the track was lifted later that same year.[1]

In June 2009, the Association of Train Operating Companies (ATOC) issued a report (Connecting Communities: Expanding Access to the Rail Network),[2] which proposed the reinstatement of the line between Bentley and Bordon, as one of 20 schemes that are recommended for further consultation. 14 of these are reinstatements of lines closed in the Beeching cuts.

Services

[edit]

Trains operate between Alton and London Waterloo, typically every 30 minutes in each direction, every day of the week. However, as Bentley is the least used station on the line, generally speaking alternate trains omit the stop at Bentley, meaning it has an hourly service. Faster services to London also pass through, but do not stop.[citation needed]

Despite the station having two platforms, the majority of the trains stop at, or pass through platform 1. Platform 2 is only used during peak hours or on Sundays, when the station is used as a passing loop.[citation needed]

Preceding station National Rail National Rail Following station
Farnham   South Western Railway
Alton Line
  Alton
Disused railways
Terminus   British Rail
Southern Region

Bordon Light Railway
  Kingsley Halt

References

[edit]
  1. ^ Subterranea Britannica: SB-Sites:Bordon Station
  2. ^ "Connecting Communities – Expanding Access to the Rail Network" (PDF). London: Association of Train Operating Companies. June 2009. p. 17. Retrieved 7 September 2018.
[edit]